The asynchronous cutting machine is characterized by the realization of waste-free cutting (also known as gap cutting), which automatically forms a gap between each finished product, which can save more than 80% of the raw material cost, saving time, labor and materials.
Uses of asynchronous cutting machine: suitable for cutting or die-cutting of special-shaped and narrow strips of various foams, EVA, diffusers, double-sided tapes, copper and aluminum foils and other materials.
Main functions and features:
● Continuous gap half-break jump cut with automatic interval formation;
● After several consecutive gap half-break trips, a full cut-off is carried out;
● Continuous gap type half-break tripping + winding;
● Special-shaped product skip cutting;
● The cutting width, spacing, quantity and cutting, cutting, and pulling speed are arbitrarily set;
● The cutter power adopts a high-power servo drive system, which has high power, fast speed and low noise;
● Adopt imported PLC+ touch screen control mode, three sets of roller precision servo system synchronously pull and position;
● The full cutting knife adopts imported edge steel knife, which is sharp and has a long life;
● Unwinding and rewinding use air expansion shaft + magnetic particle tension control;
● Easy to operate, human-machine interface is very user-friendly, each function button and data can be understood at a glance, so that the new hand can quickly master the operation, and truly realize the fool-like operation;
● This machine adopts super-heavy load load-bearing design, which is durable and has excellent stable performance
When using a precision cutting machine, there will be noise, how should we solve it at this time? The following Hexin Machinery editor will talk to you briefly;
1. The oil seal or oil bearing can be replaced to solve the sound problem.
2. When the quality of the cut engine oil is relatively poor, the hydraulic oil can be replaced, and the imported high-quality oil is better.
3. Check whether there is a lack of oil or substances flowing in the cylinder, and deal with it according to the situation.
4. According to the oil filter screen for blockage, you can clean the filter or replace the oil filter.
5. The solenoid valve should be replaced when it is damaged or cannot be repaired.
The above is the treatment method of noise phenomenon in the cutting machine, Hexin Machinery hopes that this article can bring you help.